KASRO injection sealing system DN200-600
"*" indicates required fields
Product Description
- for rehabilitation of lateral intakes
- with epoxy resin (other material possible)
- injection material is carried within membrane cartridges underneath the form plates
- the pressure of the injection is directly transferred to the damage spot
- the intersection angles and axes are not predetermined due to a side balloon and a collapsible seal on the form plate, which are fully expandable and inflatable with compressed air
- the side balloon can be sucked back behind the form plate
- the electric heating of the balloon and the form plate support the curing of the applied sealing materials
- KASRO camera change box for three cameras which show the user how the branch pipe looks like and how far the material is pressed in
Technical Data
| Dimensions DN200 | Length 716mm (without holding arm), chassis diameter 150mm, Weight 25kg |
|---|---|
| Dimensions DN250-600 | Length 550mm (without holding arm), Weight 15kg |
| Flat compressing shield | 400mm x 360mm |
| Dimensions balloon | Base diameter 100mm, Height 203mm (short conical balloon), 233mm (long conical balloon), 350mm (cylinder balloon) |
| Heating | Shield 250W, balloon 200W or 300W |
| Cartridge size | DN200/DN250: 2x 1,5 liters |
